How to Put Cross Stitch Fabric in a Ratchet Needlework Frame
By Connie G. Barwick, About.com
Mark a Line on the Fabric
Mark the Fabric Edge with a Straight line
Photo © Connie G. Barwick, licensed to About.com, Inc.
Prior to inserting the fabric in the frame, prepare the edge of the fabric with a fray blocking agent, tape, or hemstitch. In addition, before placing the fabric in the frame, mark a straight line an inch to two inches from each fabric edge with a marker or pins. These lines will guide you when placing the fabric in the frame. It is imperative that the fabric is placed in the frame as straight as possible or the frame will not be square.
Prev
- Ratchet Needlework Frame
- Identifying the Parts of the Ratchet Needlework Frame
- Side View of Ratchet Frame Needlework Rails
- Mark a Line on the Fabric
- Place the Fabric between the Two Pieces of the Rail
- Insert the Rail of the Ratchet Frame in the Side Holder
- Insert the Rail in the Groves of the Side Holder
- Assemble the Frame and Roll up the Fabric
- Use the Frame Adjuster to Change the Direction of Rail Movement
- Ratchet Frame with Cross Stitch Design in Progress
Cross Stitch Tools and Tips
Explore Cross-Stitch
Must Reads
About.com Special Features
Scrapbook Technique Gallery
Use these ideas to inspire your own uniquely beautiful pages. More >
Price Your Collectibles
Find out how much your treasured collection is worth. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.